Muton Rockhopper 46 Guia do Utilizador Página 129
- Página / 186
- Índice
- RESOLUÇÃO DE PROBLEMAS
- MARCADORES
Avaliado. / 5. Com base em avaliações de clientes
Rockhopper II series printers – User’s Guide
129
AP-75095, Rev. 2.1, 18/08/2005
5.5.2. Controlling the heater elements on the Rockhopper II 4H printer
If you want to change or check the heater elements, follow the steps below.
Step 1 :
Press the [F1] key on the operation panel.
¾ The printer works as follows.
Ready to Print
F1 →
Heaters Cleaning
← F2
F3 →
Cut&Feed LeverUp
← F4
User1 xxxm
By pressing the [F1] key, you will have direct access to control or change the heaters
temperatures.
After pressing the [F1] key in the normal status, the operation panel will mention the following :
* Heaters * (1/2)
F1 →
A : S 50 – R 50 B : S 50 – R 50
← F2
F3 →
C : S 50 – R 50 D : S 50 – R 50
← F4
heater message
* Heaters * (2/2)
F1 →
SET ON
heater message
The ‘heater message’ can be one of the following:
Heater standby
Heater warming up
Heater ready
Notes :
Previous firmware mention : ‘Heater standby’, ‘Heater ON’, ‘Heater OFF’, ‘Heater ON
(A)’, ‘Heater ON (D)’, ‘Heater ON (B)’, ‘Heater ON (C)’, ‘Heater ON (A, B)’, ‘Heater ON
(A, C)’, ‘Heater ON (A, D)’, ‘Heater ON (A, B, C)’, ‘Heater ON (A, B, D)’, ‘Heater ON (A,
C, D)’, ‘Heater ON (B, C)’, ‘Heater ON (B, D)’ and ‘Heater ON (C, D)’
‘A’ stands for the heater.
‘B’ stands for the fixer.
‘C’ stands for the post fixer.
‘D’ stands for the dryer.
‘S’ stands for the Set-temperature (requested temperature).
‘R’ stands for the Real-temperature (actual temperature).
- Rockhopper II 1
- Series printer 1
- COPYRIGHT NOTICE 3
- TABLE OF CONTENTS 7
- 1. SAFETY INSTRUCTIONS 13
- 1.4. WARNING LABELS 16
- No. Type 18
- Ink Type 19
- 2. PRODUCT OVERVIEW 21
- 2.3.1. Front 22
- 2.3.2. Back 23
- 2.3.4. Operation panel 26
- 2.4. PRINTER STATUS 28
- Notes : 29
- 3. SETTING UP THE UNIT 31
- 3.2.2. Accessories box 34
- 3.2.3. Stand packaging box 34
- 3.3. ASSEMBLY 35
- 3.3.2. Installing the stand 36
- A ) : Open the front cover 38
- 3.5. INSTALLATION 43
- Step 2 : Lock the casters 44
- 4. PREPARING FOR A JOB 45
- 4.4.1. Turning the power ON 49
- 4.4.2. Turning the power OFF 49
- 4.6. MEDIA HANDLING 54
- 4.6.2. Loading roll media 57
- 4.6.3. Setting media type 57
- 4.7. TESTPRINTING 59
- 4.7.1. Setup List 60
- 4.7.2. NozzleCheck 61
- 4.7.3. Alignment 61
- 4.7.4. Colour palette 62
- 4.7.5. Maintenance record 63
- 4.8.1. System requirements 64
- 4.8.2. Selecting cables 64
- 5. HANDLING THE PRINTER 67
- 5.3. USING MEDIA 68
- 5.3.4. The printing area 69
- Eco-Solvent Plus Media List 72
- 5.4.1. Setup menu 74
- Setup items 75
- 5.4.2. Ink status menu 76
- 5.4.3. Origin setup menu 77
- 5.4.4. Test print menu 78
- 5.4.5. Media setup menu 79
- 5.4.6. Media type menu 79
- 5.4.7. User media menu 80
- 5.4.9. InkDry menu 82
- 5.4.10. Head Height menu 83
- 5.4.11. Stiff menu 83
- 5.4.12. Thickness menu 84
- 5.4.13. Heater menu 84
- 5.4.14. Drier menu 85
- 5.4.15. Fixer menu 85
- 5.4.16. Post Fixer menu 86
- 5.4.22. Cut size menu 89
- 5.4.23. Top feed menu 89
- 5.4.24. Media cut menu 90
- 5.4.25. Shortest cut menu 90
- 5.4.26. Printing mode menu 91
- 5.4.28. Colour mode menu 92
- 5.4.30. InterLace Setup menu 93
- 5.4.32. Repeat printing menu 93
- 5.4.33. Repeat times menu 94
- 5.4.34. Interval time menu 94
- 5.4.35. Head speed menu 94
- 5.4.36. Command setup menu 95
- 5.4.37. Command select menu 96
- 5.4.38. Print step menu 96
- 5.4.39. Print position menu 96
- 5.4.40. Terminator menu 97
- 5.4.42. Online time out menu 98
- 5.4.43. Overwrite menu 98
- 5.4.44. Halftone menu 99
- 5.4.45. Layout setup menu 99
- 5.4.46. Layout method menu 100
- 5.4.47. Joint printing menu 100
- 5.4.49. Function setup menu 101
- 5.4.50. CMY 101
- K menu 101
- 5.4.51. Scale menu 102
- 5.4.52. Mirror menu 102
- 5.4.55. Centronics menu 103
- 5.4.56. Network setting menu 104
- 5.4.57. IP address menu 105
- 5.4.58. Subnet mask menu 105
- 5.4.59. Gateway menu 106
- 5.4.60. DHCP menu 106
- 5.4.61. MAC address menu 106
- 5.4.62. Version menu 107
- 5.4.63. Utility menu 107
- 5.4.64. ErrorDisplay menu 108
- 5.4.65. Media detection menu 108
- 5.4.67. Media width menu 109
- 5.4.68. Print and wipe menu 110
- Parameters Description 111
- 5.4.70. Write mode menu 112
- 5.4.71. Re-print menu 113
- 5.4.72. File delete menu 114
- 5.4.73. Re-name menu 114
- 5.4.74. Format menu 115
- 5.4.76. All Initialize menu 117
- 5.4.88. Data dump menu 121
- 5.4.89. Ink Manager menu 122
- 5.4.90. Head Wash menu 122
- 5.4.91. Ink Load menu 123
- 5.4.92. Ink Change menu 123
- 5.4.93. Cutter change menu 124
- 5.4.94. Wiper clean menu 124
- 5.4.95. Tank change menu 125
- 5.4.96. Tubing Flush menu 125
- 5.4.97. Version Check menu 126
- Step 1 : 127
- 5.5.3. Feeding media 132
- 5.5.5. Print mode check 133
- 5.6.1. Cutting media 134
- Step 4 : 135
- Step 2 : 135
- Step 3 : 135
- Step 5 : 136
- Caution : 136
- Step 6 : 136
- 6. TROUBLESHOOTING 137
- (19) Lines are missing 143
- (21) Top Feed problem 143
- 6.3. ERROR MESSAGES 144
- 6.4. WHEN MEDIA JAMS OCCUR 149
- 7. DAILY MAINTENANCE 151
- (2) Types 152
- (3) Replacement procedure 152
- Step 7 : 154
- Step 8 : 157
- Step 9 : 158
- Step 10 : 158
- Step 11 : 158
- 7.3. CLEANING 161
- (1) Cleaning frequency 162
- (2) Cleaning procedure 162
- 7.3.3. Head cleaning 163
- Step 12 : 167
- 7.4. CHANGING INK TYPES 168
- (1) Before the transfer 170
- (2) After the transfer 171
- 7.6. PERIODICAL SERVICES 172
- 7.7 END-USER SERVICE 174
- 8. APPENDIX 179
- 8.3. PRODUCT SPECIFICATIONS 180
- (1) Interface Specifications 182
- Item Specifications 183
- Name Model 184
Manuais e produtos relacionados com Digitalizar e Imprimir Muton Rockhopper 46
(258 páginas)© 2020, manymanuals-pt.com. Todos os direitos reservados. | 0.055 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentários a estes Manuais